Debug Ip Bgp Updates - Dell Z9500 Reference Manual

peer-group
peer-group-
name
in
out
Command EXEC Privilege
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
Usage Enter the no debug ip bgp command to remove all configured debug
Information commands for BGP.

debug ip bgp updates

Allows you to view information about BGP updates.
Z9500
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name | ipv6
unicast [ipv6-address]] updates [in | out | prefix-list prefix-
list-name]
To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name | ipv6 unicast [ipv6-address]] updates [in |
out] command.
Parameters
ipv6-address
peer-group
peer-group-
name
in
Border Gateway Protocol
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
(OPTIONAL) Enter the keywords peer-group followed by
the name of the peer group.
(OPTIONAL) Enter the keyword in to view BGP notifications
received from neighbors.
(OPTIONAL) Enter the keyword out to view BGP
notifications sent to neighbors.
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
followed by the prefix length in the /x format. The range is /0
to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
(OPTIONAL) Enter the keywords peer-group followed by
the name of the peer group.
(OPTIONAL) Enter the keyword in to view BGP updates
received from neighbors.
505