Dell Z9500 Reference Manual page 930

Hide thumbs Also See for Z9500:

Table of Contents

EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

The following example shows two VLANs that are associated with a private VLAN

(PVLAN) (refer to

If you have entered the clear arp-cache command to remove a large number

of ARP entries and the command is still being processed in the background, an

error message display if you attempt to enter the show arp command:

Clear arp in-progress. Please try after sometime!

The following describes the show arp command shown in the following example.

(OPTIONAL) Enter the keyword retries to show the

number of ARP retries before a 20–second back off.

(OPTIONAL) Enter the keyword dynamic to view dynamic

(OPTIONAL) Enter the keyword summary to view a summary

of ARP entries.

Introduced on the S6000-ON.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Added support for 4-port 40G line cards on ExaScale.

Introduced on the S4810.

Added support for 4094 VLANs on the E-Series ExaScale

(the prior limit was 2094).

Introduced on the E-Series ExaScale.

Introduced VRF on the E-Series.

Augmented to display local ARP entries learned from private

VLANs (PVLANs).

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

Private VLAN

IPv4 Routing