Dell Z9500 Reference Manual page 642

Hide thumbs Also See for Z9500:

Table of Contents

unit unit-num

sfm sfm-unit-

EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Enter the unit unit-num parameters with a command

option to clear hardware statistics for a specified NPU. The

range of NPU numbers is 0 to 3. The command options are:

counters: Clears the packets counters.

Enter the keyword party-bus with a command option to

clear hardware statistics for the party bus that links Z9500

CPUs. The command options are:

port port-num statistics: Clears statistics on a

specified party-bus internal port.

port all: Clear statistics on all party-bus internal ports.

Enter the keyword rp with a command option to clear

hardware statistics for the Route Processor. The command

options are:

cpu data-plane statistics: Clears data-plane

statistics, including the HiGig port statistics with input/

output counters.

cpu i2c statistics: Clears active i2c-address

cpu sata-interface statistics: Clears sata-

interface error counter statistics.

Enter the keyword sfm with an Switch Fabric Module (SFM)

unit number and a command option to clear hardware

statistics from the specified SFM on the Z9500. The range of

SFM unit numbers is from 0 to 5. The command options are:

counters: Clears the traffic counters.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Debugging and Diagnostics