Router Bgp; Show Capture Bgp-Pdu Neighbor - Dell Z9500 Reference Manual

router bgp

Enter ROUTER BGP mode to configure and enable BGP.
Z9500
Syntax
router bgp as-number
To disable BGP, use the no router bgp as-number command.
Parameters
process-id
Defaults Not configured.
Command CONFIGURATION
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0

show capture bgp-pdu neighbor

Display BGP packet capture information for an IPv6 address.
Z9500
Syntax
show capture bgp-pdu neighbor ipv6-address
Parameters
ipv6-address
Command
•
Modes
•
Command
Version
History
9.2(1.0)
8.2.1.0
7.5.1.0
Related
•
Commands
•
534
Enter the number of the OSPFv3 process. The range is 1 to
65535.
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Enter the IPv6 address (X:X:X:X::X) of a BGP neighbor.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
capture bgp-pdu neighbor
clear ip bgp – specifies a size for the capture buffer.
– enables capture of an IPv6 BGP neighbor packet.
Border Gateway Protocol