Neighbor Description - Dell Z9500 Reference Manual

To remove a default route, use the no neighbor {ip-address | peer-
group-name} default-originate command.
Parameters
ip-address
peer-group-
name
route-map
map-name
Defaults Not configured.
Command ROUTER BGP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage If you apply a route map to a BGP peer or neighbor with the neighbor default-
Information originate command configured, the software does not apply the set filters in the
route map to that BGP peer or neighbor.

neighbor description

Assign a character string describing the neighbor or group of neighbors (peer group).
Z9500
Syntax
neighbor {ip-address | peer-group-name} description text
To delete a description, use the no neighbor {ip-address | peer-group-
name} description command.
Parameters
ip-address
388
(OPTIONAL) Enter the IP address of the neighbor in dotted
decimal format.
Enter the name of the peer group to set the default route of
all routers in that peer group.
(OPTIONAL) Enter the keyword route-map then the name
of a configured route map.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Enter the IP address of the neighbor in dotted decimal
format.
Border Gateway Protocol