Neighbor Dmzlink-Bw - Dell Z9500 Reference Manual

out
Defaults Not configured.
Command ROUTER BGP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage Other BGP filtering commands include: neighbor filter-list, ip as-path
Information
access-list, and neighbor route-map.
Related
ip as-path access-list
Commands
neighbor filter-list
neighbor route-map

neighbor dmzlink-bw

Attaches a Link Bandwidth to received routes.
Z9500
Syntax
neighbor {ip-address | peer-group} dmzlink-bw
To disable BGP Link Bandwidth, enter the no neighbor {ip-address | peer-
group} dmzlink-bw command.
Parameters
ip-address
peer-group
dmzlink-bw
Defaults N/A
390
Enter the keyword out to distribute only outbound traffic.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
— configures IP AS-Path ACL.
— assigns a AS-PATH list to a neighbor or peer group.
— assigns a route map to a neighbor or peer group.
Enter the IP address of the peer.
Enter the name of the peer group.
Enter the keyword dmzlink-bw to enable BGP Link
Bandwidth in BGP multipath.
Border Gateway Protocol