Show Management Application Pkt-Cntr - Dell Z9500 Reference Manual

Version
9.2(1.0)
9.2.(0.0)
Example
Dell#show ip management-eis-route
Destination
-----------
10.11.0.0/16
172.16.1.0/24

show management application pkt-cntr

Display the number of packets for each application type that have taken the management route.
Z9500
Syntax
show management application pkt-cntr
Defaults None.
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
9.2.(0.0)
Example
Dell#show management application pkt-cntr
dns
ftp
ntp
radius
sflow-collector
snmp
ssh
syslog
tacacs
telnet
tftp
858
Description
Introduced on the Z9500.
Introduced on the Z9000, S4810, and S4820T.
Gateway
-------
ManagementEthernet 0/0
10.11.192.4
Description
Introduced on the Z9500.
Introduced on the Z9000, S4810, and S4820T.
: 2
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
State Route Source
----- ------------
Connected Connected
Active Static
Interfaces