Show Interface Dcbx Detail - Dell Z9500 Reference Manual

Usage This command is available at the global level only.
Information

show interface dcbx detail

Displays the DCBX configuration on an interface.
Syntax
show interface port-type slot/port dcbx detail
Parameters
port-type
slot/port
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
Usage
To clear DCBX frame counters, use the clear dcbx counters interface
Information
stack-unit/port command.
The following describes the show interface dcbx detail command shown in
the following example.
Field
Interface
Port-Role
DCBX Operational
Status
Configuration
Source
Local DCBX
Compatibility
mode
Local DCBX
Configured mode
Data Center Bridging (DCB)
Enter the port type.
Enter the slot/port number.
Description
Introduced on the Z9500.
Description
Interface type with chassis slot and port number.
Configured the DCBX port role: auto-upstream, auto-
downstream, config-source, or manual.
Operational status (enabled or disabled) used to elect a
configuration source and internally propagate a DCB
configuration. The DCBX operational status is the
combination of PFC and ETS operational status.
Specifies whether the port serves as the DCBX configuration
source on the switch: true (yes) or false (no).
DCBX version accepted in a DCB configuration as
compatible. In auto-upstream mode, a port can only receive
a DCBX version supported on the remote peer.
DCBX version configured on the port: CEE, CIN, IEEE v2.5,
or Auto (port auto-configures to use the DCBX version
received from a peer).
593