Dell Z9500 Reference Manual page 825

Hide thumbs Also See for Z9500:

Table of Contents

linecard slot-id

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

In the Examples, the delta column displays changes since the last screen refresh.

The following are the monitor command menu options.

monitor time

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For a VLAN interface, enter the keyword vlan then the

slot/port. The range is from 1 to 4094.

Enter the linecard slot-id parameters to specify the

Z9500 ports on a line card. The range of slot IDs is from 0 to

EXEC Privilege

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Added support for 4-port 40G line cards on ExaScale.

Introduced on the S4810.

Introduced on the E-Series ExaScale.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

Displays the host name assigned to the system.

Displays the amount of time since the monitor

interface command was entered.

Displays the amount of time the chassis is up (since last

Change the view from a single interface to all interfaces on

the line card or visa-versa.

Refresh the view.