Dell Z9500 Reference Manual page 159

ifagt number
ifcb interface
stack-unit unit-
ID
trace-flags
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.0.2.0
9.0.0.0
8.3.19.0
8.3.12.0
8.3.11.1
8.5.1.0
7.6.1.0
Example
Dell#show software ifm clients summary
ClntType Inst svcMask subSvcMask tlvSvcMask tlvSubSvc swp
IPM
RTM
VRRP
L2PM
Control and Monitoring
Enter the keyword ifagt then the number of an interface
agent to display software pipe and IPC statistics.
Enter the keyword ifcb then one of the following interface
IDs then the slot/port information to display interface control
block information for that interface:
• For a port channel interface, enter the keywords port-
channel then a number. The range is from 1 to 512.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Enter the keyword stack-unit then the stack member
number to display IFM information for that unit.
Enter the keyword trace-flags to display IFM information
for internal trace flags.
EXEC
EXEC Privilege
Description
Introduced on the S6000-ON.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced for the C-Series and S-Series.
0 0x00000000 0x00000000 0x90ff71f3 0x021e0e81 31
0 0x00000000 0x00000000 0x800010ff 0x01930000 43
0 0x00000000 0x00000000 0x803330f3 0x00400000 39
0 0x00000000 0x00000000 0x87ff79ff 0x0e032200 45
NOTE: This option is only available on the S-Series.
159