Default-Metric - Dell Z9500 Reference Manual

out
Command EXEC Privilege
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
Usage Enter the no debug ip bgp command to remove all configured debug
Information
commands for BGP.

default-metric

Allows you to change the metrics of redistributed routes to locally originated routes. Use this command
with the redistribute command.
Z9500
Syntax
default-metric number
To return to the default setting, use the no default-metric command.
Parameters
number
Defaults 0
Command ROUTER BGP
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
Usage The default-metric command in BGP sets the value of the BGP
Information MULTI_EXIT_DISC (MED) attribute for redistributed routes only.
Related
•
Commands
•
506
(OPTIONAL) Enter the keyword out to view BGP
notifications updates sent to neighbors.
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Enter a number as the metric to be assigned to routes from
other protocols. The range is 1 to 4294967295.
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
bgp always-compare-med
redistribute – redistributes routes from other routing protocols into BGP.
– enables comparison of all BGP MED attributes.
Border Gateway Protocol