Version
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
7.6.1.0
MBGP Commands
Multiprotocol BGP (MBGP) is an enhanced BGP that enables multicast routing policy throughout the
internet and connecting multicast topologies between BGP and autonomous systems (ASs).
MBGP on the Dell Networking OS is implemented as per IETF RFC 1858.
BGPv4 is supported in the following:
Dell Networking
Platform Support
OS Version
Z9500
7.8.1.0, MBGP for
TeraScale and C-Series
IPv6
7.8.1.0, MBGP for
S-Series
IPv4 Multicast Only
8.2.1.0, MBGP
E-Series ExaScale
debug ip bgp dampening
View information on routes being dampened.
Z9500
Syntax
debug ip bgp [vrf vrf-name] [ipv4 {unicast | multicast} | ipv6
unicast] dampening
To disable debugging, use the no debug ip bgp dampening command.
Parameters
vrf vrf-name
ipv4 multicast
Border Gateway Protocol
Description
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the keyword vrf followed by the name of the VRF to
view information on dampened routes corresponding to that
VRF.
(OPTIONAL) Enter the keyword ipv4 followed by the
keyword multicast to view dampened-route information
related only to ipv4 multicast routes.
461