Debug Fip Snooping; Debug Fip Snooping Rx - Dell Z9500 Reference Manual

debug fip snooping

Enable debugging on FIP snooping.
Z9500
Syntax
debug fip-snooping [all | acl | error | ifm | info | ipc | tx]
Parameters
all
acl
error
ifm
info
ipc
tx
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
8.3.19.0
8.3.12.0

debug fip snooping rx

Enable debugging for FIP snooping receive-specific packets.
Z9500
Syntax
debug fip-snooping rx packet-type [all | discovery | virtual-
link-instantiation | virtual-link-maintenance| vlan-discovery]
[interface]
Parameters
packet-type
738
Enter the keyword all to enable debugging on all the
options.
Enter the keyword acl for ACL-specific debugging.
Enter the keyword error for error-specific debugging.
Enter the keyword ifm for IFM-specific debugging.
Enter the keyword info for information-specific debugging.
Enter the keyword ipc for IPC-specific debugging.
Enter the keyword tx for packet transmit-specific
debugging.
Description
Introduced on the Z9500 and S6000-ON.
Introduced on the S4820T.
Introduced on the S4810.
Enter the keyword packet-type and then the option type
on which to enable debugging. The options are:
FCoE Transit