Bgp Confederation Identifier; Bgp Dampening - Dell Z9500 Reference Manual

bgp confederation identifier

Configure an identifier for a BGP confederation.
Z9500
Syntax
bgp confederation identifier as-number
To delete a BGP confederation identifier, use the no bgp confederation
identifier as-number command.
Parameters
as-number
Defaults Not configured.
Command ROUTER BGP
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
Usage
The autonomous systems configured in this command are visible to the EBGP
Information
neighbors. Each autonomous system is fully meshed and contains a few
connections to other autonomous systems. The next hop, MED, and local
preference information is preserved throughout the confederation.
The system accepts confederation EBGP peers without a LOCAL_PREF attribute.
The software sends AS_CONFED_SET and accepts AS_CONFED_SET and
AS_CONF_SEQ.

bgp dampening

Enable BGP route dampening and configure the dampening parameters.
Z9500
Syntax
bgp dampening [half-life reuse suppress max-suppress-time]
[route-map map-name]
To disable route dampening, use the no bgp dampening [half-life reuse
suppress max-suppress-time] [route-map map-name] command.
Parameters
half-life
484
Enter the AS number. The range is 1 to 65535.
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
(OPTIONAL) Enter the number of minutes after which the
Penalty is decreased. After the router assigns a Penalty of
1024 to a route, the Penalty is decreased by half after the
Border Gateway Protocol