Dell Z9500 Reference Manual page 631

Hide thumbs Also See for Z9500:

Table of Contents

linecard unit-id

A summary of the results of offline diagnostic tests run on all Z9500 CPUs (Control

Processor, Route Processor, and line cards) is displayed.

EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Use the show diag command to view a summary of diagnostic information

presented for each Z9500 CPU. CPU diagnostic results are presented in the

following order: Control Processor (CP), line-card processor 0 (LP0), line-card

processor 1 (LP1), line-card processor 2 (LP2), and Route Processor (RP).

Debugging and Diagnostics

Enter the keyword all to display the results of offline

diagnostic tests on all Z9500 CPUs, including the Control

Processor, Route Processor, and line cards.

Enter the cp unit-id parameters to display the results only

of the offline diagnostic tests run on the Control Processor

CPU. The Control Processor CPU ID is 0.

Enter the rp unit-id parameters to display the results only

of the offline diagnostic test srun on the Route Processor

CPU. The Route Processor CPU ID is 0.

Enter the linecard unit-id parameters to display the

results only of the offline diagnostic test run on a specified

line card. he range of line-card CPU IDs is from 0 to 2. Each

line-card CPU processes packets on the corresponding

Z9500 line card; for example, line-card CPU 1 processes

packets on line card 1.

Enter the keyword summary to display a summary of the

offline diagnostic test results.

Enter the keyword detail to display detailed information

about the offline diagnostic test results.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced the verbose option.

Introduced on the S-Series.