Clear Line - Dell Z9500 Reference Manual

Version
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
E-Series
Usage This command clears alarms that are no longer active. If an alarm situation is still
Information active, it is seen in the system output.

clear line

Reset a terminal line.
Z9500
Syntax
clear line {line-number | console 0 | vty number}
Parameters
line-number
console 0
vty number
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
94
Description
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
Enter a number for one of the 12 terminal lines on the
system. The range is from 0 to 11.
Enter the keywords console 0 to reset the console port.
Enter the keyword vty then a number to clear a terminal
line. The range is from 0 to 9.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Control and Monitoring