Hg-Link-Bundle-Monitor Enable - Dell Z9500 Reference Manual

Defaults none
Command EXEC Privilege
Modes
Command
Version
History
9.2.1.0
9.3.0.0
Example
Dell# clear hardware linecard 0 hg-stats unit 0 port 59
Dell# show hardware linecard 0 hg-stats unit 0 port 59
Higig Port Statistics:
HiGigabitEthernet 0/0/59,
Input Statistics:
byte pkts
Output Statistics:
byte pkts
7236269947061497449 wredDrops
Rate info (interval 15 seconds):
line-rate
line-rate
Related show hardware hg-stats
Commands link bundle.

hg-link-bundle-monitor enable

Enable the monitoring of link utilization and traffic distribution in backplane HiGig link bundles/port
channels on a line-card or switch fabric module (SFM) NPU.
Z9500
Syntax
hg-link-bundle-monitor {sfm npu-id hg-port—channel hg-port—
channel-id | slot slot npuUnit npu-id hg-port—channel 0} enable
To disable HiGig link-bundle monitoring, use the no version of this command.
Interfaces
Description
Introduced on the Z9500 switch.
Added support for the hg-stats option on the Z9000
platform.
0 packets, 0 bytes
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-
0 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
0 packets, 0 bytes 0 underruns
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-
0 Multicasts, 0 Broadcasts 0 Unicasts
0 throttles, 0 discarded, 8247266722598448750 collisions
Input 00.00 Mbits/sec,
Output 00.00 Mbits/sec,
— displays traffic statistics from internal ports in a HiGig
0 packets/sec, 0.00% of
0 packets/sec, 0.00% of
873