Dell Z9500 Reference Manual page 558

Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
Usage
This command applies to both IPv4 and IPv6 CAM Profiles, but is best used when
Information
verifying QoS optimization for IPv6 ACLs.
QoS Optimization for IPv6 ACLs does not impact the CAM usage for applying a
policy on a single (or the first of several) interfaces. It is most useful when a policy
is applied across multiple interfaces; it can reduce the impact to CAM usage across
subsequent interfaces.
The following describes the test cam-usage command shown in the following
example.
Term
Linecard
Portpipe
CAM Partition
Available CAM
Estimated CAM
per Port
Status
Example
Dell# test cam-usage service-policy input pcam linecard all
Estimated CAM per Port | Status
---------------------------------------------------------------
---------------------------
|
|
|
|
|
558
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced.
Explanation
Lists the line cards that are checked. Entering all displays
the status for line cards in the chassis.
Lists the port pipes (port sets) that are checked. Entering
all displays the status for all line cards and port pipes in the
chassis.
Shows the CAM profile of the CAM.
Identifies the amount of CAM space remaining for that
profile.
Estimates the amount of CAM space the listed policy will
require.
Indicates whether or not the policy will be allowed in the
CAM.
linecard | Portpipe | CAM Partition | Available CAM |
0 |
0 |
0 |
1 |
1 |
1 |
0 | IPv4Flow
1 | Allowed (408)
1 | IPv4Flow
1 | Allowed (408)
2 | IPv4Flow
1 | Allowed (408)
0 | IPv4Flow
1 | Allowed (408)
1 | IPv4Flow
1 | Allowed (408)
2 | IPv4Flow
| 408
| 408
| 408
| 408
| 408
| 408
Content Addressable Memory (CAM)