Show Mac Accounting Access-List - Dell Z9500 Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

show mac accounting access-list

Display MAC access list configurations and counters (if configured).

show mac accounting access-list access-list-name interface

interface in | out

access-list-

Access Control Lists (ACL)

Identify whether ACL is applied on ingress or egress side.

Introduced on the S6000–ON.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Added support for 4-port 40G line cards on ExaScale.

Enter the name of a configured MAC ACL, up to 140

Enter the keyword interface then the one of the following

keywords and slot/port or number information:

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For a port channel interface, enter the keywords port-

channel then a number. The range is from 1 to 512.

For a VLAN interface, enter the keyword vlan then a

number from 1 to 4094.

Identify whether ACL is applied on ingress or egress side.

EXEC Privilege