Resequence Access-List - Dell Z9500 Reference Manual

resequence access-list

Re-assign sequence numbers to entries in an existing ACL.
Z9500
Syntax resequence access-list {ipv4 | ipv6 | mac} {access-list-name StartingSeqNum Step-
to-Increment}
Parameters
ipv4 | ipv6 |
mac
access-list-
name
StartingSeqNu
m
Step-to-
Increment
Defaults The sequence number of ACL entries increases in multiples of 5; for example, seq
5, seq 10, seq 15 ...
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
8.1.1.0
7.8.1.0
7.6.1.0
7.5.1.0
Access Control Lists (ACL)
Enter the keyword ipv4, ipv6 or mac to identify the access-
list type to resequence.
Enter the name of a configured ACL.
Enter the starting sequence number to resequence. For IPv4
and IPv6 ACLs, the range is 0 to 4294967290; for MAC ACLs,
the range is 0 to 65535.
Enter the step to increment the sequence number. For IPv4
and IPv6 ACLs, the range is 0 to 4294967290; for MAC ACLs,
the range is 0 to 65535.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale (IPv6).
Introduced on the E-Series ExaScale (IPv4).
Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names were up to 16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
217