Show Ip Dhcp Snooping - Dell Z9500 Reference Manual

Defaults none
Command EXEC Privilege
Modes
Command
Version
History
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0

show ip dhcp snooping

Display the contents of the DHCP binding table or display the interfaces configured with IP Source Guard.
Syntax
show ip dhcp snooping [binding | source-address-validation
[discard-counters [interface interface]]]
Parameters
binding
source-
address-
validation
discard-
counters
interface
interface
Defaults none
Command
•
Modes
•
Dynamic Host Configuration Protocol (DHCP)
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Display the binding table.
Display the interfaces configured with IP Source Guard.
(OPTIONAL) Display the number of dropped packets.
(OPTIONAL) Specifies an interface to show the discard
counters.
Enter any of the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel then a number. The range is from 1 to 512.
EXEC
EXEC Privilege
691