Ipv6 Dhcp Snooping Database Write-Delay; Ip Dhcp Snooping Database Renew - Dell Z9500 Reference Manual

Version
8.3.11.1
8.3.7.0
8.3.1.0
7.8.1.0

ipv6 dhcp snooping database write-delay

To set time interval for storing the snooping binding entries in a file.
Syntax
[no] ipv6 dhcp snooping database write-delay value
To disable the storing of snooping binding entries in a file, use the no ipv6 dhcp
snooping write-delay command.
Parameters
value
Defaults none
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)

ip dhcp snooping database renew

Renew the binding table.
Z9500
Syntax
ip dhcp snooping database renew
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
702
Description
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the C-Series and S-Series.
The range is from 5 to 21600. The value of the minutes range
is from 5 min. to 15 days.
Description
Introduced on the S4810, S4820T, S6000 and Z-Series.
EXEC
EXEC Privilege
Dynamic Host Configuration Protocol (DHCP)