Show Processes Ipc - Dell Z9500 Reference Manual

315
309
302
263
296
flashmntr
198
---------- More ----------
Example: show
Dell#show processes cpu summary
processes cpu
CPU utilization
summary
---------------------------------------
CP
RP

show processes ipc

Display the IPC messaging used internally between Dell Networking OS processes.
Z9500
Syntax
show processes ipc [recv-stats | send-stats] [cp | rp |
linecard {slot-id | all}]
Parameters
recv-stats
send-stats
cp
rp
linecard slot-id
Defaults Display IPC message statistics on all Z9500 CPUs: Control Processor, Route
Processor, and line cards.
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
146
10 1
20 2
460 46
0 0
0 0
0 0
5Sec
Enter the keyword recv-stats to display information on
IPC receiver-side messages.
Enter the keyword send-stats to display information on
IPC sender-side messages.
Enter the keyword cp to view IPC message statistics on the
Control Processor CPU.
Enter the keyword rp to view IPC message statistics on the
Route Processor CPU.
Enter the slot ID of the line card for which you want to view
IPC message statistics. The range of Z9500 slot IDs is from 0
to 2. Enter linecard all to view IPC statistics for all line
cards.
EXEC
EXEC Privilege
10000 0.00% 0.00% 0.00%
10000 0.00% 0.00% 0.00%
10000 0.00% 0.00% 0.00%
0 0.00% 0.00% 0.00%
0 0.00% 0.00% 0.00%
0 0.00% 0.00% 0.00%
1Min 5Min
43% 42% 40%
0% 0% 0%
0 rip
0 acl
0 sysd
0 sysmon
0
0 inetd
Control and Monitoring