Command
CONFIGURATION (conf-frrp)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.11.1
8.3.11.1
8.3.7.0
8.2.1.0
7.4.1.0
mode
Set the Master or Transit mode of the ring.
Z9500
Syntax
mode {master | transit}
To reset the mode, use the no mode {master | transit} command.
Parameters
master
transit
Defaults
Mode None
Command
CONFIGURATION (conf-frrp)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
758
Description
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced.
Enter the keyword master to set the Ring node to Master
mode.
Enter the keywordtransit to set the Ring node to Transit
mode.
Description
Introduced on the Z9500.
Force10 Resilient Ring Protocol (FRRP)