Logging Coredump Server - Dell Z9500 Reference Manual

Usage You cannot delete a terminal connection.
Information
Related
access-class
Commands
IP access control list (ACL).
password

logging coredump server

Configure the switch to move (upload) a core dump for an application or kernel crash to an external FTP
server.
Z9500
Syntax
logging coredump server {ipv4-address | ipv6-address} username
name password [type] password
Parameters
{ipv4-address |
ipv6-address}
name
type
password
Defaults Core dumps for kernal and application crashes are stored in the local flash of the
Z9500 Control Processor CPU.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
9.0(1.0)
Control and Monitoring
— restricts the incoming connections to a particular IP address in an
— specifies a password for users on terminal lines.
Enter the server IPv4 address (A.B.C.D) or IPv6 address
(X:X:X:X::X).
Enter a username to access the target server.
Enter the password type:
• Enter 0 to enter an unencrypted password.
• Enter 7 to enter a password that has already been
encrypted using a Type 7 hashing algorithm.
Enter a password to access the target server.
Description
Introduced on the Z9500.
Introduced on the S5000.
117