Description - Dell Z9500 Reference Manual

packet
detail
ring-id
count number
Defaults Disabled.
Command CONFIGURATION (conf-frrp)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.11.1
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.4.1.0
Usage Because the resilient ring protocol can potentially transmit 20 packets per
Information interface, restrict debug information.

description

Enter an identifying description of the ring.
Z9500
Syntax
description Word
To remove the ring description, use the no description [Word] command.
Parameters
Word
754
Enter the keyword packet to display brief debug
information related to control packets.
Enter the keyword detail to display detailed debug
information related to the entire ring protocol packets.
(Optional) Enter the ring identification number. The range is
from 1 to 255.
Enter the keyword count then the number of debug
outputs. The range is from 1 to 65534.
Description
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced.
Enter a description of the ring. Maximum: 255 characters.
Force10 Resilient Ring Protocol (FRRP)