Show Fip-Snooping Fcf - Dell Z9500 Reference Manual

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
8.3.19.0
8.3.12.0
Usage The following describes the show fip-snooping enode command shown in the
Information
following example.
Field
ENode MAC
ENode Interface
FCF MAC
VLAN
FC-ID
Example
Dell# show fip-snooping enode
Enode MAC
--------- --------------- ------- ---- -----
d4:ae:52:1b:e3:cd Te 1/11
62:00:11

show fip-snooping fcf

Display information on the FCFs in FIP-snooped sessions, including the FCF interface and MAC address,
FCF interface, VLAN ID, FC-MAP value, FKA advertisement period, and number of ENodes connected.
Z9500
Syntax
show fip-snooping fcf [fcf-mac-address]
Parameters
fcf-mac-
address
Command
•
Modes
•
744
Description
Introduced on the Z9500 and S6000-ON.
Introduced on the S4820T.
Introduced on the S4810.
Description
MAC address of the ENode.
Slot/ port number of the interface connected to the ENode.
MAC address of the FCF.
VLAN ID number the session uses.
Fibre Channel session ID the FCF assigns.
Enode Interface FCF MAC
Enter the MAC address of the FCF to display.
EXEC
EXEC Privilege
54:7f:ee:37:34:40 100
VLAN FC-ID
FCoE Transit