Debug Ip Packet - Dell Z9500 Reference Manual

Version
8.1.1.0
7.6.1.0
7.5.1.0
6.3.1.0
Example
ICMP: echo request rcvd from src 40.40.40.40
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: echo request sent to dst 40.40.40.40
ICMP: echo request rcvd from src 40.40.40.40
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: echo request sent to dst 40.40.40.40
Usage
To stop packets from flooding the user terminal when debugging is turned on, use
Information
the count option.

debug ip packet

View a log of IP packets sent and received.
Z9500
Syntax
debug ip packet [access-group name] [count value] [interface]
To disable debugging, use the no debug ip packet [access-group name]
[count value] [interface] command.
Parameters
access-group
name
count value
interface
906
Description
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Added the count option.
Enter the keyword access-group then the access list name
(maximum 16 characters) to limit the debug output based on
the defined rules in the ACL.
(OPTIONAL) Enter the keyword count then the count value.
The range is from 1 to 65534. The default is Infinity.
(OPTIONAL) Enter the following keywords and slot/port or
number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For the Management interface on the stack-unit, enter
the keyword ManagementEthernet then the slot/port
information. The slot range is from 0 to 1. The port range
is 0.
IPv4 Routing