Clear Ip Bgp Peer-Group - Dell Z9500 Reference Manual

Version
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage If you enter the clear ip bgp flap-statistics command without any
Information parameters, all statistics are cleared.
Related
show debugging
Commands
show ip bgp flap-statistics
undebug all

clear ip bgp peer-group

Reset a peer-group's BGP sessions.
Z9500
Syntax
clear ip bgp [vrf vrf-name] peer-group peer-group-name [ipv4
[multicast | unicast] | ipv6 unicast] [soft {in | out}]
Parameters
vrf vrf-name
peer-group-
name
ipv4 multicast
ipv4 unicast
ipv6 unicast
soft
370
Description
Added the ipv4 multicast and ipv6 unicast parameters.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
— views the enabled debugging operations.
— views the BGP flap statistics.
— disables all debugging operations.
Enter the keyword vrf and then the name of the VRF to
reset the peer group corresponding to that VRF.
NOTE: You can use this attribute on a specific VRF to
remove history routes corresponding to that VRF. You
can also use this attribute to return the suppressed
routes corresponding to a specific VRF to an active state.
Enter the peer group name to reset the BGP sessions within
that peer group.
(OPTIONAL) Enter the keyword ipv4 followed by the
keyword multicast to reset ipv4 multicast routes.
(OPTIONAL) Enter the keyword ipv4 followed by the
keyword unicast to reset ipv4 unicast routes.
(OPTIONAL) Enter the keyword ipv6 followed by the
keyword unicast to reset ipv6 unicast routes.
(OPTIONAL) Enter the keyword soft to reset soft
configuration.
Border Gateway Protocol