Neighbor Distribute-List - Dell Z9500 Reference Manual

peer-group-
name
text
Defaults Not configured.
Command ROUTER BGP
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0

neighbor distribute-list

Distribute BGP information via an established prefix list.
Z9500
Syntax
neighbor {ipv6-address | peer-group-name} distribute-list
prefix-list-name {in | out}
To delete a neighbor distribution list, use the no neighbor {ipv6-address |
peer-group-name} distribute-list prefix-list-name {in | out}
command.
Parameters
ipv6-address
peer-group-
name
prefix-list-
name
in
out
Defaults Not configured.
Command ROUTER BGPV6-ADDRESS FAMILY
Modes
Border Gateway Protocol
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
Enter a continuous text string up to 80 characters.
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Enter the name of the peer group.
Enter the name of an established prefix list. If you do not
configure the prefix list, the default is permit (to allow all
routes).
Enter the keyword in to distribute only inbound traffic.
Enter the keyword out to distribute only outbound traffic.
513