Show Boot System - Dell Z9500 Reference Manual

Proceed with factory settings? Confirm [yes/no]:n

show boot system

Displays information about boot images currently stored on the system.
Z9500
Syntax
show boot system all
Parameters
all
Defaults none
Command
•
Modes
•
Example
Dell#show boot system all
Current system image information in the system:
=============================================
Type
--------------------------------------------------
CP
RP
linecard 0 is not present.
linecard 1 is not present.
linecard 2
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
File Management
Display the boot images stored on the system for the
Control Processor, Route Processor, and line card CPUs.
EXEC
EXEC Privilege
Boot Type
DOWNLOAD BOOT 9-3
DOWNLOAD BOOT 9-3
DOWNLOAD BOOT 9-3
Description
Introduced on the Z9500.
A B
9-3
9-3
9-3
65