Show Interfaces Port-Channel - Dell Z9500 Reference Manual

show interfaces port-channel

Display information on configured Port Channel groups.
Z9500
Syntax
show interfaces port-channel [channel-number] [brief]
Parameters
channel-
number
brief
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
E-Series legacy
command
Usage The following describes the show interfaces port-channel command shown
Information
in the following example.
Field
Port-Channel 1...
Interfaces
For a Port Channel interface, enter the keyword port-
channel then a number. For Z9500, the range is from 1 to
512.
(OPTIONAL) Enter the keyword brief to display only the
port channel number, the state of the port channel, and the
number of interfaces in the port channel.
EXEC
EXEC Privilege
Description
Introduced on the S6000-ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series. Modified to display the LAG
failover group status.
Introduced on the C-Series.
Description
Displays the LAG's status. In the Example, the status of the
LAG's LAG fate-sharing group ("Failover-group") is listed.
867