show hardware stack-unit
and output statistics of the designated component of the designated stack
member.
show hardware system-flow
stack member and stack member port-pipe.
show interfaces stack-unit
Series stack member.
show processes memory (S-Series)
processes running in an S-Series.
show processes ipc flow-control
Display the single window protocol queue (SWPQ) statistics.
S4810
Syntax
show processes ipc flow-control [cp]
Parameters
cp
Defaults
none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Control and Monitoring
(OPTIONAL) Enter the keyword cp to view the control
processor's SWPQ statistics.
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
— displays the data plane or management plane input
— displays Layer 3 ACL or QoS data for the selected
— displays information on all interfaces on a specific S-
— displays CPU usage information based on
143