Show Processes Ipc Flow-Control - Dell Force10 S4810P Reference Manual

show processes memory (S-Series)
running in an S-Series.

show processes ipc flow-control

Display the single window protocol queue (SWPQ) statistics.
C-Series, E-Series, S-Series, Z-Series
Syntax show processes ipc flow-control [cp | rp1 | rp2 | lp linecard-
number]
Parameters
cp
rp1
rp2
lp
number
Defaults none
Command Modes
Command History
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
170
(OPTIONAL) Enter the keyword cp to view the control processor's
SWPQ statistics.
(OPTIONAL) Enter the keyword rp1 to view the control processor's
SWPQ statistics on Route Processor 1.
(OPTIONAL) Enter the keyword rp2 to view the control processor's
SWPQ statistics on Route Processor 2.
linecard-
(OPTIONAL) Enter the keyword lp followed by the line card number
to view the control processor's SWPQ statistics on the specified line
card.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
– displays CPU usage information based on processes
NOTE: Not supported in the S-Series.
NOTE: Not supported in the S-Series.
NOTE: Not supported in the S-Series.