show platform ipc trace
show platform ipc trace
Use the show platform ipc trace privileged EXEC command to display platform-dependent
Interprocess Communication (IPC) Protocol trace log information.
Note
This command is supported only on stacking-capable switches.
Syntax Description
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.2(40)EX1
Usage Guidelines
You should use this command only when you are working directly with a technical support
representative while troubleshooting a problem. Do not use this command unless a technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
C-18
Appendix C
show platform ipc trace [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Show Platform Commands
OL-13271-03