Configuring Nmea Output - Leica mojo3D User Manual

9.1
NMEA settings,
step–by–step
Leica mojo3D, NMEA Output

Configuring NMEA Output

To configure advanced NMEA settings, carry out the following steps:
1. On the main navigation screen, tap on the Setup button.
2. On the flyout menu, tap the NMEA button.
The NMEA configuration screen appears.
3. Tap Output NMEA option button.
4. Tap or to set the baud rate.
5. In the sentence list, tap the NMEA
sentence name, then tap the
output rate required. Tap
to reveal more choices in the
lists.
or
133