Mac Access-List Extended - Dell Force10 S4810P Reference Manual

Version 7.5.1.0
Version 7.4.1.0
pre-Version
6.1.1.0
Usage
When you use the log option, the CP processor logs detail the packets that match. Depending
Information
on how many packets match the log entry and at what rate, the CP may become busy as it has
to log these packets' details.
Related
permit
Commands
seq

mac access-list extended

Name a new or existing extended MAC access control list (extended MAC ACL).
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax mac access-list extended access-list-name [cpu-qos
To delete a MAC access list, use the no mac access-list extended access-
list-name command.
Parameters
access-list-name
cpu-qos
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.10.0
Version 8.1.1.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage
The number of entries allowed per ACL is hardware-dependent. For detailed specifications on
Information
entries allowed per ACL, refer to your line card documentation.
294
Introduced on the C-Series.
Added the monitor option.
Introduced on the E-Series.
NOTE: When ACL logging and byte counters are configured simultaneously, byte counters
may display an incorrect value. Configure packet counters with logging instead.
– configures a MAC address filter to pass packets.
– configures a MAC address filter with a specified sequence number.
Enter a text string as the MAC access list name, up to 140 characters.
Enter the keywords cpu-qos to assign this ACL to control plane
traffic only (CoPP).
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Increased the name string to accept up to 140 characters. Prior to
7.8.1.0, names were up to 16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.