Description; Match As-Path - Dell Force10 S4810P Reference Manual

If the route-map entry contains sets with the continue clause, set actions are performed first
then the continue clause jumps to the specified route map entry.
Related
set community — specifies
Commands
set as-path — configures

description

Add a description to this route map.
C-Series, E-Series, S-Series, Z-Series
Syntax description {description}
To remove the description, use the no description {description} command.
Parameters
description
Defaults none
Command Modes ROUTE-MAP
Command History
Version 8.3.11.1
Version 8.1.1.0
pre-Version
7.7.1.0
Related route-map
Commands

match as-path

Configure a filter to match routes that have a certain AS number in their BGP path.
C-Series, E-Series, S-Series, Z-Series
Syntax match as-path as-path-name
To delete a match AS path filter, use the no match as-path as-path-name command.
Parameters
as-path-name
Defaults Not configured.
306
• If a set action occurs in the first route map entry and then the same set action occurs
with a different value in a subsequent route map entry, the last set of actions overrides
the previous set of actions with the same set command.
• If set community additive and set as-path prepend are configure, the
communities and AS numbers are prepended.
a COMMUNITY attribute.
a filter to modify the AS path.
Enter a description to identify the route map (80 characters
maximum).
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced.
– enables a route map.
Enter the name of an established AS-PATH ACL, up to 140 characters.