Resequence Access-List - Dell Force10 S4810P Reference Manual

resequence access-list

Re-assign sequence numbers to entries of an existing access-list.
C-Series, E-Series, S-Series, Z-Series
Syntax resequence access-list {ipv4 | ipv6 | mac} {
Increment }
Parameters
ipv4 | ipv6 | mac
access-list-name
StartingSeqNum
Step-to-
Increment
Defaults none
Command Modes
Command History
Version 8.3.11.1
Version 8.2.1.0
Version 8.1.1.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 7.4.1.0
Usage
When you have exhausted all the sequence numbers, this feature permits re-assigning a new
Information
sequence number to entries of an existing access-list.
Related resequence prefix-list ipv4
Commands
244
Enter the keyword ipv4or mac to identify the access list type to
resequence.
Enter the name of a configured IP access list.
Enter the starting sequence number to resequence. The range is 0 to
4294967290.
Enter the step to increment the sequence number. The range is 1 to
4294967290.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the E-Series ExaScale (IPv6).
Introduced on the E-Series ExaScale (IPv4).
Increased the name string to accept up to 140 characters. Prior to
7.8.1.0, names were up to 16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– resequences a prefix list.
access-list-name StartingSeqNum Step-to-