Replacing The Compact Flash On The Ers 8800; Installing And Removing A Usb Memory Device In The 8895Sf/Cpu - Avaya 8800 Installation Manual

Replacing the compact flash on the ERS 8800

The ERS 8800 2 GB Compact Flash (DS1411038-E6) is for the 8895 SF/CPU on the ERS
8800 switch. Make sure you use the correct compact flash part number for your SF/CPU
module.
For more information on any of the steps described in this procedure, see Avaya Ethernet
Routing Switch 8800/8600 Upgrades, NN46205-400.
Procedure
1. Back up the contents of the existing compact flash using FTP or TFTP.
2. Use the following command to gracefully stop operation of the external flash:
3. Eject the existing compact flash.
4. Replace the compact flash card.
5. Format the compact flash:
6. Restore the files that were backed up in
Installing and removing a USB memory device in the
8895SF/CPU
The 8895SF/CPU module has a USB 2.0 port on the front panel to insert a USB memory device
for copying files.
Installation — Modules
dos-stop /pcmcia
dos-format /pcmcia
Replacing the compact flash on the ERS 8800
Step 1 on page 91.
October 2014 91