Assigning Static Routes To The Management Interface - Avaya 8800 Commissioning Manual

Assigning static routes to the management interface

Assign static routes to the management interface to specify network and gateway IP addresses
used to remotely manage the device. You can specify up to four static routes for the
management interface.
Procedure steps
1. In the Device Physical View, select the management port.
2. In the navigation tree, open the following folders: Configuration > Edit.
3. Click Mgmt Port.
4. Click the CPU Route Table tab.
5. Click Insert.
6. Enter the new Network and Gateway IP addresses.
7. Click Insert.
Variable definitions
Use the data in the following table to configure the Insert CPU Route Table tab.
Variable
Network
Gateway
Commissioning
Assigning static routes to the management interface
Specifies the network IP address.
Specifies the device gateway IP address.
Value
June 2011 81