RRP 6-57 Exit Roller Safety Interlock Switch
Assembly (PL 20.11)
Fig 6-47 Exit Roller Safety Interlock Switch Assembly
Removal
1.
Remove the Front and Rear Top Cover (RRP 6-16).
2.
Remove the Switch Assembly.
3.
Unplug the connector (CN 43) of the Harness Motor (PL 20.16.13) from the
Safety Switch Assembly.
4.
Remove the screw that secures to the Safety Switch Assembly from the Safety
Switch Assembly, and remove the Safety Switch Assembly.
Replacement
1.
Align the Safety Switch Assembly with the mounting position in the Compile
Guide (PL 20.11.11) to secure it
2.
Plug the connector (CN 43) of the Harness Motor PL 20.16.13) to the Safety
Switch Assembly.
3.
Mount the Sensor Assembly.
4.
Mount the Front and Rear Top Cover (RRP 6-16).
6-774
DocuPrint N4525 Network Laser Printer - Service Guide
S4525-478