Show Ipv6 Brief - NETGEAR ProSafe GSM7224P User Manual

no ipv6 icmp error-interval
Use the no form of the command to return burst-interval and burst-size to their default
values.
Format
no ipv6 icmp error-interval
Mode
Global Config

show ipv6 brief

Use this command to display the IPv6 status of forwarding mode and IPv6 unicast routing
mode.
Format
show ipv6 brief
Mode
Privileged EXEC
Term Definition
IPv6
Shows whether the IPv6 forwarding mode is enabled.
Forwarding
Mode
IPv6 Unicast
Shows whether the IPv6 unicast routing mode is enabled.
Routing Mode
IPv6 Hop Limit
Shows the unicast hop count used in IPv6 packets originated by the node. For more
information, see
ICMPv6 Rate
Shows how often the token bucket is initialized with burst-size tokens. For more
Limit Error
information, see
Interval
ICMPv6 Rate
Shows the number of ICMPv6 error messages that can be sent during one burst-interval.
Limit Burst Size
For more information, see
Maximum
Shows the maximum IPv6 route table size.
Routes
Example: The following shows example CLI display output for the command.
(Switch) #show ipv6 brief
IPv6 Forwarding Mode........................... Enable
IPv6 Unicast Routing Mode...................... Enable
IPv6 Hop Limit................................. 0
ICMPv6 Rate Limit Error Interval............... 1000 msec
ICMPv6 Rate Limit Burst Size................... 100 messages
Maximum Routes................................. 3000
ProSafe Managed Switch
ipv6 hop-limit on page 356.
ipv6 icmp error-interval on page 364.
ipv6 icmp error-interval
IPv6 Commands
365
on page 364.