Table of Contents
Advertisement
R
Tile Features
Tile Features Overview
To minimize power consumption and area, many important GTP functions are shared
between two transceivers. These functions include the generation of a high-speed serial
clock, resets, power control, and dynamic reconfiguration.
Correct clocking and reset behavior is critical for any GTP transceiver design. This chapter
describes the following steps that must be performed when configuring the GTP_DUAL
tile:
•
•
•
These steps are performed automatically when the Wizard is used to configure the
GTP_DUAL tile.
Virtex-5 RocketIO GTP Transceiver User Guide
UG196 (v1.3) May 25, 2007
Set the shared PLL rate
Set the reference clock source
Implement the Link Idle Reset circuit
www.xilinx.com
Chapter 5
59
Advertisement
Table of Contents
