Preface: About This Guide; Rocketio X Features; User Guide Organization; Chapter 3: Clocking And Clock Domains - Xilinx RocketIO X User Manual

Hide thumbs Also See for RocketIO X:
Table of Contents

Advertisement

R
About This Guide

RocketIO X Features

RocketIO X transceivers have flexible, programmable features that allow a multi-gigabit
serial transceiver (MGT) to be easily integrated into any Virtex-II Pro X design:

User Guide Organization

This guide is organized as follows:
RocketIO™ X Transceiver User Guide
UG035 (v1.5) November 22, 2004
Variable speed full-duplex transceiver, allowing 2.488 Gb/s to 10.3125 Gb/s baud
transfer rates, including specific baud rates used by various standards (listed in
Table 1-2, page
27)
Depending on the Virtex-II Pro X device, from 8 to 20 transceiver modules on an FPGA
Monolithic clock synthesis and clock recovery system, eliminating the need for
external components
Automatic lock-to-reference function
Serial output differential swing that can be programmed between 200 mV to 1600 mV
(peak-peak), allowing compatibility with other serial system voltage levels
Levels of programmable emphasis from 0 to 500% (not all emphasis and swing
combinations can be attained)
Receiver equalization
AC and DC coupling
On-chip termination of 50Ω (eliminating the need for external termination resistors)
Pre and post driver serial and parallel TX to RX internal loopback modes for testing
operability
Programmable comma detection to allow for any protocol and detection of any 10-bit
character
8B/10B and 64B/66B encoding blocks
Preface, "About This Guide"
a multi-gigabit serial transceiver to be integrated easily into any Virtex-II Pro X design.
Chapter 1, "RocketIO X Transceiver Overview"
architecture and capabilities. Includes instantiations, VHDL code examples, available
ports, primitive and modifiable attributes, and byte mapping.
Chapter 2, "Digital Design Considerations"
communications protocol primitives; transceiver instantiation; 8B/10B encoding;
64B/66B encoding; channel
Chapter 3, "Clocking and Clock Domains"
and examples for clocking and reset schemes.
www.xilinx.com
1-800-255-7778
– Summary of RocketIO X transceiver features, which allow
– RocketIO X transceiver basic
– Ports and attributes for the provided
bonding.
– Clock domain architecture; clock ports,
Preface
21

Advertisement

Table of Contents
loading

Table of Contents