Registering authentication cards from the database
Smart cards that are already in the Management program's database can be registered as
authentication cards.
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
2. Select an encryption group from the Encryption Center Devices table, then select Group >
FIGURE 188
3. Click Register from Archive.
FIGURE 189
4. Select a card from the table, then click OK.
5. Wait for the confirmation dialog box indicating initialization is done, then click OK.
Brocade Network Advisor SAN User Manual
53-1002696-01
dialog box (Refer to
Figure 185
Security from the menu task bar to display the Encryption Group Properties dialog box. The
Security tab is selected
(Figure
Encryption Group Properties dialog box - Security tab
The Authentication Cards dialog box displays
are in the database.
Authentication Cards dialog box - registering smart cards from archive
The card is added to the Registered Authentication Cards table.
on page 526).
188).
(Figure
189). The table lists the smart cards that
20
Smart card usage
531