Editing A Link Reset Threshold; Editing A Protocol Error Threshold - Brocade Communications Systems StoreFabric SN6500B User Manual

Editing a Link Reset threshold

NOTE
This threshold is only available for Fabric OS devices.
NOTE
This feature requires a Trial or Licensed version.
Use to block a port when the Link Reset violation type meets the Fabric OS switch threshold.
To edit a Link Reset threshold, complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
2. Select Link Reset (Fabric OS only) from the Violation Type list.
3. Select the threshold you want to change and click Edit.
4. Complete
5. Click OK on the Edit Link Reset Threshold dialog box.
6. Click OK on the Port Fencing dialog box.

Editing a Protocol Error threshold

NOTE
This threshold is only available for Fabric OS devices.
NOTE
This feature requires a Trial or Licensed version.
Use to block a port when one of the following ISL protocol errors meet the threshold:
•
•
•
To edit a Protocol Error threshold, complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
2. Select Protocol Error from the Violation Type list.
Brocade Network Advisor SAN User Manual
53-1002696-01
The Port Fencing dialog box displays.
The Edit Link Reset Threshold dialog box displays.
step 4 through step 7
If the threshold has already been assigned to ports, an "Are you sure you want to make the
requested changes to this threshold on "X" ports?" message displays. Click OK to close.
To assign this threshold to fabrics, switches, or switch ports, refer to
page 821.
ISL Bouncing–ISL has repeatedly become unavailable due to link down events.
ISL Segmentation–ISL has repeatedly become segmented.
ISL Protocol Mismatch–ISL has been repeatedly put into the Invalid Attachment state due to a
protocol error.
The Port Fencing dialog box displays.
in "Adding a Link Reset threshold"
24
Editing thresholds
on page 817.
"Assigning thresholds" on
825