TABLE 1 Documentation Supporting Fabric OS v7.0.x (Continued) Publication Title Fabric OS Release Page Number Publication Date Web Tools Administrator’s Guide v7.0.0 Updates on page 37 April 2011 v7.0.1 Updates on page 37 December 2011 6510 Hardware Reference Manual v7.0.0 and later Updates on page 41 August 2011...
Brocade Resources To get up-to-the-minute information, go to http://my.brocade.com and register at no cost for a user ID and password. For practical discussions about SAN design, implementation, and maintenance, you can obtain Building SANs with Brocade Fabric Switches through: http://www.amazon.com For additional Brocade documentation, visit the Brocade SAN Info Center and click the Resource Library location: http://www.brocade.com...
Page 10
Fabric OS Documentation Updates 53-1002165-05...
Chapter Access Gateway Administrator’s Guide In this chapter The updates in this chapter are for the Access Gateway Administrator’s Guide, publication number 53-1002156-01, published April 2011. • Documentation updates for Fabric OS v7.0.0 and later ....1 Documentation updates for Fabric OS v7.0.0 and later Chapter 2, Configuring Ports in Access Gateway Mode Under the heading of “Default port mapping”...
Page 12
Documentation updates for Fabric OS v7.0.0 and later Fabric OS Documentation Updates 53-1002165-05...
Chapter CEE Command Reference In this chapter The updates in this chapter are for the Converged Enhanced Ethernet Command Reference, publication number 53-1002164-01, published April 2011. • Documentation updates for Fabric OS v7.0.0 and later ....3 Documentation updates for Fabric OS v7.0.0 and later Under the command show statistics access-list mac, replace the Command Modes entry with the following:...
Page 14
show running-config show running-config Displays the contents of the configuration file currently running on the system. Synopsis show running-config {access-list | cee-map | dot1x | interface | linecard | lldp | rmon | spanning-tree} Operands access-list Displays the running configuration of the access list. cee-map Displays the QoS Converged Enhanced Ethernet (CEE) maps configuration.
Chapter Fabric OS Administrator’s Guide In this chapter • Documentation updates for Fabric OS v7.0.0 and later ....5 • Documentation updates for Fabric OS v7.0.1 and later ....6 Documentation updates for Fabric OS v7.0.0 and later The updates in this section are for the Fabric OS Administrator’s Guide, publication number 53-1002148-03, published July 2011.
Documentation updates for Fabric OS v7.0.1 and later On page 460, change the note after Table 79 from this: NOTE QoS requires an additional 20 buffer credits per active port so maximum supported distances may be lower. To this: NOTE The distances in Table 79 assume QoS is enabled.
Chapter Fabric OS Command Reference In this chapter • Documentation Updates for Fabric OS v7.0.1 ......7 •...
Page 18
rtLogTrace Displays the number of times that the port lost single VC_RDY primitive signal or a single frame. er_multi_credit_loss Displays the number of times that the port lost multiple VC_RDY primitive signals or multiple frames To display the port statistics on the Brocade 5610: switch:admin>...
Documentation Updates for Fabric OS v7.0.0 Correct the description of the enable option as follows: --enable Enables the RTLog on the active Control Processor (CP). The RTLog becomes effective on the standby CP after a failover or a reboot of the active CP. Documentation Updates for Fabric OS v7.0.0 The updates in this section are for the Fabric OS Command Reference, publication number 53-1002147-01, published April 2011.
Page 20
cryptoCfg cryptoCfg On page 159, modify the description of the cryptocfg - -reg -KAClogin parameter as shown and add the example in the example section: --reg -KAClogin Registers the node KAC login credentials (username and password) with the configured key vaults. This command is valid for the Thales nCipher (TEMS), the HP SKM, and the TKLM key vaults.
Page 21
portLoopBackTest portLoopBackTest Augment the note on page 751 and in the corresponding man pag as followse: This diagnostic cannot be run on an operational switch. You must disable the switch using the chassisDisable command before you can run this test. After the test completes, re-enable the switch using the chassisEnable command.
Page 22
supportSave supportSave Add the following note to the supportSave command and associated man page: If you use anonymous FTP to run supportSave on a chassis with multiple AP blades, configure the FTP windows server to allow unlimited anonymous users. Fabric OS Documentation Updates 53-1002165-05...
Chapter Fabric OS Encryption Guide Supporting LKM In this chapter The updates in this chapter are for the Fabric OS Encryption Administrator’s Guide Supporting NetApp Lifetime Key Manager (LKM) Environments, publication number 53-1002160-02, published June 2011. Documentation updates for LKM Chapter 3, Configuring Brocade Encryption Using CLI Failover/failback policy configuration A correction has been made to heartbeat values for the following:...
Page 24
Documentation updates for LKM • Use the cryptocfg exportmasterkey file option to export the master key to a file. • Use the cryptocfg recovermasterkey currentMK srcfile to recover the master key. Fabric OS Documentation Updates 53-1002165-05...
Chapter Fabric OS Encryption Guide Supporting RKM In this chapter The updates in this chapter are for the Fabric OS Encryption Administrator’s Guide Supporting RSA Key Manager (RKM) Environments, publication number 53-1002158-02, published June 2011. Documentation updates for RKM Chapter 2, Encryption configuration using the Management application Disk device decommissioning Under the heading of “Displaying and deleting decommissioned key IDs”...
Documentation updates for RKM 2. Select a switch from the Encryption Center Devices table, then select Switch > Decommissioned key IDs from the menu task bar, or right-click a switch and select Decommissioned key IDs. The Decommissioned Key IDs dialog box displays. 3.
Documentation updates for RKM Chapter 5, Best Practices and Special Topics Key Vault Best Practices • When encrypted disk LUNs are to be configured or moved to an Encryption Group that uses a different key vault, make sure to decommission the encrypted LUNs from the old Encryption Group.
Page 28
Documentation updates for RKM Fabric OS Documentation Updates 53-1002165-05...
Chapter Fabric OS Encryption Guide Supporting SKM and ESKM In this chapter The updates in this chapter are for the Fabric OS Encryption Administrator’s Guide Supporting HP Secure Key Manager (SKM) Environments, and HP Enterprise Secure Key Manager (ESKM) Environments publication number 53-1002159-03, published July 2011. Documentation updates for SKM Chapter 3, Configuring Brocade Encryption Using CLI Failover/failback policy configuration...
Page 30
Documentation updates for SKM • Use the cryptocfg exportmasterkey file option to export the master key to a file. • Use the cryptocfg recovermasterkey currentMK srcfile to recover the master key. Fabric OS Documentation Updates 53-1002165-05...
Chapter Fabric OS Encryption Guide Supporting TEMS In this chapter The updates in this chapter are for the Fabric OS Encryption Administrator’s Guide Supporting Thales Encryption Manager for Storage (TEMS) Environments, publication number 53-1002161-02, published June 2011. Documentation updates for TEMS Chapter 3, Configuring Brocade Encryption Using CLI Failover/failback policy configuration A correction has been made to heartbeat values for the following:...
Page 32
Documentation updates for TEMS • Use the cryptocfg exportmasterkey file option to export the master key to a file. • Use the cryptocfg recovermasterkey currentMK srcfile to recover the master key. Fabric OS Documentation Updates 53-1002165-05...
Chapter Fabric OS Encryption Guide Supporting TEMS In this chapter The updates in this chapter are for the Fabric OS Encryption Administrator’s Guide Supporting Tivoli Key Lifecycle Manager (TKLM) Environments, publication number 53-1002162-02, published June 2011. Documentation updates for TKLM Chapter 3, Configuring Brocade Encryption Using CLI Failover/failback policy configuration A correction has been made to heartbeat values for the following:...
Page 34
Documentation updates for TKLM • Use the cryptocfg exportmasterkey file option to export the master key to a file. • Use the cryptocfg recovermasterkey currentMK srcfile to recover the master key. Fabric OS Documentation Updates 53-1002165-05...
Chapter Fabric OS FCIP Administrator’s Guide In this chapter The updates in this chapter are for the Fabric OS FCIP Administrator’s Guide, publication number 53-1002155-01, published April 2011. • Documentation updates for Fabric OS v7.0.0 and later ....25 Documentation updates for Fabric OS v7.0.0 and later Chapter 2, FCIP on the 7800 Switch and FX8-24 Blade Under the heading of “7800 switch license options”...
Page 36
Documentation updates for Fabric OS v7.0.0 and later Fabric OS Documentation Updates 53-1002165-05...
DRAFT: BROCADE CONFIDENTIAL Chapter Fabric OS MIB Reference In this chapter The updates in this chapter are for the Fabric OS MIB Reference, part number: 53-1002151-01, published April 2011. • Documentation updates for Fabric OS v7.0.1 ......27 Documentation updates for Fabric OS v7.0.1 Chapter 1, Understanding Brocade SNMP Under the heading “Before Loading MIBs”...
DRAFT: BROCADE CONFIDENTIAL Documentation updates for Fabric OS v7.0.1 Chapter 4, FE MIB Objects Under the heading “Definitions for FIBRE-CHANNEL-FE-MIB” on page 75, replace the following rows in Table 9. TABLE 9 FIBRE-CHANNEL-FE-MIB definitions Type Definition Value Description FcFeFxPortCapacity Integer from 1 to 640 Maximum number of Fx_Ports within a module.
Chapter Fabric OS Troubleshooting and Diagnostics Guide In this chapter The updates in this chapter are for the Fabric OS Troubleshooting and Diagnostics Guide, publication number 53-1002150-02, published June 2011. • Documentation updates for Fabric OS v7.0.0 and later ....33 •...
Documentation updates for Fabric OS v7.0.1 and later Documentation updates for Fabric OS v7.0.1 and later Chapter 10, Diagnostic Features In the section “Diagnostic Port” on page 92, in the fourth paragraph, change the second sentence from this: D_Port configuration fails if the port is configured in R_RDY mode, encryption mode, or compression mode.
Chapter Fabric Watch Administrator’s Guide In this chapter The updates in this chapter are for the Fabric Watch Administrator’s Guide, publication number 53-1002153-03, published April 2011. • Documentation updates for Fabric Watch v7.0.0 and later ... . . 35 Documentation updates for Fabric Watch v7.0.0 and later Chapter 1.
Documentation updates for Fabric Watch v7.0.0 and later Chapter 9. Fabric Watch configuration using Web Tools The following, incorrect paragraph was removed from the note in the “Configuring Threshold Traits” section on page 91: To set a Custom Defined percentage, use a corresponding value between 0.0 and 10.0. For example, to set a range of values of 53 percent through 77 percent, your Low Boundary value is 5.3 and the High Boundary value is 7.7.
Chapter Web Tools Administrator’s Guide In this chapter The updates in this chapter are for the Web Tools Administrator’s Guide, publication number 53-1002152-01, published April 2011. • Documentation updates for Fabric OS v7.0.0 ......37 •...
Documentation updates for Fabric OS v7.0.1 Chapter 2, Using the Web Tools Interface Under the heading “Working with Web Tools: recommendations” on page 29, replace the following bullet. Original: • A maximum of five simultaneous HTTP sessions to any one switch is recommended. An HTTP session is considered a Fabric Manager or Web Tools connection to the switch.
Documentation updates for Fabric OS v7.0.1 NOTE With Fabric OS v7.0.1, Web Tools supports interoperability between a Fabric OS fabric and a Brocade Network OS fabric through an FC router. You can select this interoperability mode in the FC Port Configuration Wizard.
Page 50
Documentation updates for Fabric OS v7.0.1 Fabric OS Documentation Updates 53-1002165-05...
Chapter Brocade 6510 Hardware Reference Manual In this chapter The updates in this chapter are for various hardware manuals. • Chapter 2, Brocade 6510 Installation and Configuration....41 •...
Page 52
Appendix A, Brocade 6510 Specifications Fabric OS Documentation Updates 53-1002165-05...
Chapter Brocade DCX 8510-8 Backbone Hardware Reference Manual In this chapter The updates in this chapter are for various hardware manuals. • Chapter 5, Removal and Replacement Procedures ....43 Chapter 5, Removal and Replacement Procedures All of the following occurs under the heading “WWN card removal and replacement.”...
Page 54
Chapter 5, Removal and Replacement Procedures 4. Contact Brocade Technical Support for a replacement WWN card. Technical Support will require the supportsave data collected in the previous step so that a replacement can be programmed prior to shipping to your location. DO NOT execute the frureplace command.
Chapter Brocade DCX 8510-4 Hardware Reference Manual In this chapter The updates in this chapter are for various hardware manuals. • Chapter 5, Removal and Replacement Procedures ....45 Chapter 5, Removal and Replacement Procedures All of the following occurs under the heading “WWN card removal and replacement.”...
Page 56
Chapter 5, Removal and Replacement Procedures 4. Contact Brocade Technical Support for a replacement WWN card. Technical Support will require the supportsave data collected in the previous step so that a replacement can be programmed prior to shipping to your location. DO NOT execute the frureplace command.
Chapter Brocade DCX Backbone Hardware Reference Manual In this chapter The updates in this chapter are for various hardware manuals. • Chapter 5, Removal and Replacement Procedures ....47 Chapter 5, Removal and Replacement Procedures All of the following occurs under the heading “Removal and replacement of the WWN card.”...
Page 58
Chapter 5, Removal and Replacement Procedures 4. Contact Brocade Technical Support for a replacement WWN card. Technical Support will require the supportsave data collected in the previous step so that a replacement can be programmed prior to shipping to your location. DO NOT execute the frureplace command.
Chapter Brocade DCX-4S Backbone Hardware Reference Manual In this chapter The updates in this chapter are for various hardware manuals. • Chapter 5, Removal and Replacement Procedures ....49 Chapter 5, Removal and Replacement Procedures All of the following occurs under the heading “Removal and replacement of the WWN card.”...
Page 60
Chapter 5, Removal and Replacement Procedures 4. Contact Brocade Technical Support for a replacement WWN card. Technical Support will require the supportsave data collected in the previous step so that a replacement can be programmed prior to shipping to your location. DO NOT execute the frureplace command.