12
Port Auto Disable
Port Auto Disable
The Port Auto Disable dialog box allows you to enable and disable the port auto disable flag on
individual FC_ports or on all ports on a selected device, as well as unblock currently blocked ports.
Enabling the port auto disable on a port or device configures a port to become blocked when any of
the following five events occur:
•
•
•
•
•
NOTE
To enable or disable the port auto disable flag, the device must be running Fabric OS 6.3 or later.
You can also configure ports to become blocked when one or more of the events listed above
occur.
NOTE
To configure the specific events that trigger the port auto disable flag, the device must be running
Fabric OS 7.0 or later.
Viewing the port auto disable status
NOTE
The device must be running Fabric OS 6.3 or later.
To view the port auto disable status, complete the following steps.
1. Select Configure > Port Auto Disable.
380
Loss Of Sync
Loss OF Signal
OLS (Offline Primitive Sequence)
NOS (Not Operational Primitive Sequence)
LIP (Loop Initialization Primitive Sequence)
The Port Auto Disable dialog box displays.
Brocade Network Advisor SAN User Manual
53-1002696-01