Brocade Communications Systems StoreFabric SN6500B User Manual page 469

4. Click OK.
5. Click Start.
6. Click Close after the configuration is complete (indicated by "Completed" in the Progress list).
Editing a port configuration
The Edit Port Configuration dialog box allows you to modify port configuration parameters that were
configured using the Add Port Configuration dialog box.
1. Click Edit on the Configure Host Adapter Ports dialog box.
2. Modify the parameters that are described in
3. Click OK to save the changes.
Duplicating a port configuration
1. Click Duplicate on the Configure Host Adapter Ports dialog box.
2. Change the name of the configuration and click OK to save the changes.
Deleting a port configuration
1. Select a configuration from the Port Configuration list in the Configure Host Adapter Ports
2. Click the Delete button.
Brocade Network Advisor SAN User Manual
53-1002696-01
•
Enter the minimum allowable output bandwidth in the Min Bandwidth (Mbps) box. The
minimum bandwidth is 0 Mbps. A zero value of minimum bandwidth (the default)
implies that no bandwidth is guaranteed for that vNIC.
•
BB Credit Recovery—Enables you to enable or disable buffer-to-buffer (BB) credits, which
are a flow control mechanism that represent the availability of resources at the receiving
port. Supported state change notification (BB_SCN) values are from 1 through 15 and the
default is 1.
The Adapter Port Configuration Status dialog box displays.
The adapter port configuration is applied to the ports.
The Edit Port Configuration dialog box displays.
The Duplicate Port Configuration dialog box displays. The default name of the configuration file
is source_name copy1.
dialog box.
The port configuration is removed from the list.
Bulk port configuration
"Adding a port configuration"
15
on page 419.
421